ISO 15552 Cylinders

Kuhnke manufacture a complete range of pneumatic cylinders from 3mm bore, small compact designs, up to 320mm bore. The products shown here are the standard work horse 32mm - 320mm bore ranges. Both designs are to the European standard ISO 15552. The 21 series 32mm - 100mm are of a clean line design with long operating life and low friction.

All Kuhnke ISO 15552 series cylinders are double acting with adjustable cushioning and magnetic pistons as standard. All bore sizes are available with through rod, stainless piston rods and viton seals if required. There are standard stroke sizes but Kuhnke can manufacture to your exact stroke requirements.

The PDF downloads available here are full catalogues which include details and part numbers of cylinders, mountings, spare parts & sensors.

Kuhnke ISO 15552 "21 Series" cylinders replace the previous "20" series (ISO 6431 VDM 24562) and most of the earlier "tie-rod" profile "18" series. The 32, 40, 50, 63, 80 and 100mm bore sizes are available in the new clean profile 21 series design whilst larger 125 - 320mm bore cylinders (VD & VF series) from Kuhnke are a tie-rod design. The 20 series is discontinued but replacements can be eaily substituted with the lower cost new design. The mounting for the 21 series are unchanged from the 20 series.

If you already know the product you are looking for these pages include the Kuhnke VD/VF/18/20/21 and 33 series.

image

ISO 15552 Cylinders - 32 - 100mm bore (Kuhnke 21 Series)

ISO 15552 Cylinders - 32 - 100mm bore (Kuhnke 21 Series)  
image

ISO 15552 Cylinders - 125 - 320mm bore (Kuhnke VF & VD Series)

ISO 15552 Cylinders - 125 - 320mm bore (Kuhnke VF & VD Series)  
image

ISO 15552 Cylinders (Kuhnke 18 Series) - Pre 2007 Design

ISO 15552 Cylinders (Kuhnke 18 Series) - Pre 2007 Design
image

ISO 15552 Cylinders (Kuhnke 20 Series) Pre 2007 Design

ISO 15552 Cylinders (Kuhnke 20 Series) Pre 2007 Design